মূল বিষয়বস্তুতে যান
রোবোট্রি ল্যাবস
Example:
Circuit Lab
Live Hardware VisualizationSTOPPED
ESP32-S3-WROOM-1: Module with the ESP32-S3, flash, optional PSRAM and the antenna.ESP32-S3-WROOM-1RGB LED: Addressable RGB LED (GPIO48 on v1.0, GPIO38 on v1.1).BOOT: Holds GPIO0 low for upload mode.RST: Resets the chip.USB (UART): USB-to-UART port: uploads and Serial Monitor.USB (native): Native USB OTG port on GPIO19/20.

GPIO Pin Monitor

No active GPIO pins configured yet. Call pinMode() in setup().

Serial Monitor
No serial output yet. Use Serial.print() in your code.