মূল বিষয়বস্তুতে যান
রোবোট্রি ল্যাবস
Example:
Circuit Lab
Live Hardware VisualizationSTOPPED
ESP32-C3-MINI-1: Module with the ESP32-C3 chip, 4 MB flash and the antenna.ESP32-C3-MINI-1RGB LED (GPIO8): Addressable WS2812 RGB LED controlled through GPIO8.BOOT: Holds GPIO9 low for upload mode.RESET: Resets the chip.USB-UART: USB-to-UART bridge for uploads and the Serial Monitor.Micro-USB: Power, uploads and serial.

GPIO Pin Monitor

No active GPIO pins configured yet. Call pinMode() in setup().

Serial Monitor
No serial output yet. Use Serial.print() in your code.